This is an article about the electric system of the Rimor SuperBrig 630.
Here comes the main switch board:
If you don´t speak Italian, then switch the language to English: move the cursor to the “door” symbol and press “OK”. You can the select with the “left/right” arrows the various languages. Once you have reached “English”, press “OK” again and you are done.
My favorite state is to leave the control unit on the battery symbol. Use the “up/down” arrows to switch between the various electrical measurement values. An important value is the voltage “AUX ACC” of the living compartment battery. Anything above 10.5V is ok.
Another interesting measurement value is the engine battery voltage “ENGIN ACC”:
And also important: the actual charging/discharging current of the living compartment battery. A negative value “-” indicates that the battery is currently charged. 20Amps charging current is typical when you are charging an empty living compartment battery, see below:
If this value does not appear then – very likely – the main fuse from the engine´s generator to the living compartment battery is burnt. It has a yellow color and a squarish shape. You find it under the steering wheel, just above the clutch pedal, see here:
When the living compartment battery is down to – let´s say – 11.0 Volts, all what you need is to run the engine half an hour, and it has enough energy to support the heating fan during and the Meltem airing device night time.